BETREF$

Valorant to CS2 Sens Converter

CS2 sens = Valorant sens x 3.182. Type your Valorant sensitivity and get the CS2 one that turns exactly as far for the same mouse movement. Swap to go from CS2 to Valorant. Coming from Apex, Fortnite or Overwatch? Use the full sens converter.
In your mouse software or on the mouse's DPI button. Unsure? Leave 800: the converted sens is the same at any DPI.
CS2 sensitivity
1.273
exact 1.27273
cm per 360°
40.8
16.1 inches
CS2 eDPI
1018
at 800 DPI
CS2 setting
3 decimals
Multiplier, 0.0001 to 8
sensitivity 1.273Put it in a full config

Easiest: Settings, Keyboard / Mouse, Mouse Sensitivity. For the console, switch it on first (it is off by default): Settings, Game, Enable Developer Console (~), then press ~ in game.

Hip-fire only: zoom, scoped and ADS sensitivity are separate settings in each game. Compare this aim with CS2 pros.

Valorant 0.4 in every game

Each of these turns 40.8 cm for a full 360°. Tap a game to make it the result.

GameSensitivityeDPI
1.2731018
1.2731018
0.4320
1.2731018
5%-
4.24-
4.24-
5-
0.249199

Sensitivities are rounded to what each game's field takes. eDPI (DPI x sens) only compares players within one game, and only for games with a multiplier scale.

How to use it

  1. Find your Valorant sensitivity: Settings, General, Mouse, Sensitivity: Aim.
  2. Type it in the box. Keep your mouse DPI as it is: the CS2 number is the same at any DPI.
  3. Set the result in CS2: Settings, Keyboard / Mouse, Mouse Sensitivity, or with the console command shown.
  4. Leave zoom_sensitivity_ratio at 1 to start, then play a few games before you change anything.

The formula

CS2 sens = Valorant sens x 3.182, and Valorant sens = CS2 sens / 3.182. Both games turn the camera a fixed number of degrees for every count your mouse sends, times your sensitivity. CS2 turns 0.022 degrees per count at sensitivity 1 (its m_yaw setting, in the game's own command list). Valorant turns 0.07 degrees, as players have measured it; Riot doesn't publish the number. 0.07 / 0.022 = 3.1818, which rounds to 3.182.

Valorant to CS2: common sensitivities

ValorantCS2cm/360 at 800 DPI
0.20.63681.6
0.250.79565.3
0.30.95554.4
0.351.11446.7
0.41.27340.8
0.451.43236.3
0.51.59132.7
0.61.90927.2

CS2 to Valorant: common sensitivities

CS2Valorantcm/360 at 800 DPI
0.80.25164.9
10.31452
1.250.39341.6
1.50.47134.6
20.62926
2.50.78620.8
30.94317.3

Scoped sensitivity: Operator to AWP

The converter covers hip-fire. Zoomed aim is a second setting in each game: Valorant's Scoped Sensitivity Multiplier and CS2's zoom_sensitivity_ratio (default 1, range 0.01 to 3 in CS2's command list). Both start at 1 and multiply your converted sensitivity while scoped, but each game scales zoomed turning by its own method, which neither publisher documents. So we don't print a converted scoped number we can't back up. Start at 1 in CS2; if the AWP feels too fast or slow after a few games, move it in small steps.

After converting

  1. Set the number in CS2: Settings, Keyboard / Mouse, Mouse Sensitivity.
  2. For the console, turn it on first (it is off by default): Settings, Game, Enable Developer Console (~). Then press ~ and type sensitivity 1.273 with your own number.
  3. Keep the same mouse DPI you used in Valorant.
  4. Play a few deathmatches before you judge it, then change in small steps if it feels off.
  5. Check it: move the mouse the cm/360 shown by the converter. You should end up facing the same way you started, in both games.

Besides sens: what else to set up in CS2

See what the best players use on our CS2 pro settings page. New to CS2? Open a free CS2 case or compare CS2 skin trading sites.

Sources: CS2 m_yaw 0.022, zoom_sensitivity_ratio and con_enable defaults from the game's command list (our console commands page); Valorant 0.07 measured by players (Riot doesn't publish it); Valorant menu paths and the Scoped Sensitivity Multiplier default from Valorant's settings menu. Yaw values checked 16 October 2026.

FAQ

How do I convert Valorant sens to CS2?
Multiply your Valorant sensitivity by 3.182 (more exactly 0.07 / 0.022). A Valorant sens of 0.4 becomes 1.273 in CS2, and you turn exactly as far for the same mouse movement.
How do I convert CS2 sens to Valorant?
Divide your CS2 sensitivity by 3.182, or multiply it by 0.314. A CS2 sens of 2.0 becomes 0.629 in Valorant, at any DPI as long as you keep the same one.
Should I change my DPI when I switch?
No. Keep the same DPI in both games and convert only the in-game sensitivity. Your cm/360 (how far you move the mouse for a full turn) then stays the same.
What should I set for the AWP if I used the Operator?
Start with CS2's zoom_sensitivity_ratio at its default of 1, the same as Valorant's Scoped Sensitivity Multiplier default of 1. Both scale your converted sensitivity when you zoom, but by each game's own method, so the scoped feel won't match exactly. Change it in small steps after a few games.
Why does the console not open when I press ~ in CS2?
CS2's developer console is off by default (con_enable is false). Turn on Settings, Game, Enable Developer Console (~), then press ~. Or skip the console and set Settings, Keyboard / Mouse, Mouse Sensitivity.

More free tools

All tools →